Here are 10 unexpected ways to combine your hand tools and power tools to make DIY work a little easier.
Stick an Allen wrench into your drill
Power drill and Allen wrench being used to extract eyehook Credit: Jeff SomersThis works better: Place an Allen wrench in your power drill’s chuck, slide the end of the wrench into the eyehook, and let the drill do the work. It's faster, it saves your elbows and wrists the strain, and you’ll wonder why you never thought of it before.
By combining a shop vac with your gluing efforts, you can make this much more effective. Position the shop vac up close against one end of the crack and turn it on. Then apply the glue from the other end, moving toward the shop vac. The suction will pull the glue into the crack, filling it up and resulting in a stronger bond.
Use a sander to clean your putty knives
Orbital sander cleaning knife Credit: Jeff SomersYou can try cleaning them, but water will rust them and it’s often a laborious process, especially if they’re covered in cement or thinset. If you’ve got an orbital sander, however, cleaning your putty knives and drywall knives is pretty easy. Using a moderate grit (120 works well) pad, just sand down your blade with gentle pressure—don’t overdo it; just let the sandpaper do its work. You’ll have shiny, clean blades in no time.
If I forget my level, I’m in trouble—unless I happen to have a carpenter’s square and a chalk line. Place the bottom of the square on the surface you’re checking, and loop your chalk line over the top at the 90° mark so it dangles down. Then adjust until the line is directly over the 45° mark on the bottom. That’s means it's level.
Use a screwdriver and hammer to remove stubborn nails
Hammer and screwdriver extracting nail Credit: Jeff SomersTo protect a surface you don’t want to damage and give yourself a little extra leverage on the nail, place a screwdriver under your hammer. This will give your pull a little more oomph while stopping your hammer from gouging the surface beneath.
Got a stubborn nail and don’t have your hammer or prybar? Or dealing with a nail that’s lost its head? You can get it free with the help of a vise grip and a putty knife. Lock the vise grip onto the nail and slide a putty knife onto the surface behind the nail. Rotate the vise grips like a lever, and the nail will slowly pull free, while the putty knife blade protects the surface underneath from damage.
Combine a wrench or pliers and a screwdriver for more torque
Screwdriver and pliers extracting screw Credit: Jeff SomersAnother way to tackle a nail that just won’t work itself free (or that’s lost its head) is to combine a vise grip and a flat prybar. Lock the grips onto the top of the nail to act as the head, then angle the prybar underneath and apply pressure. You can also slide a putty knife under the prybar blade if you want to protect the surface you’re extracting the nail from.
Use a hammer and driver bit to remove painted over screws
Hammer and drill bit cleaning screw head Credit: Jeff SomersInstead of doing that, combine a hammer and a screwdriver bit: position the bit on the screw head and give it some solid taps with the hammer. The crusted paint will fall right out, and you can get on with your work.
Use an adjustable wrench to find the right drill bit
If you’ve got an adjustable wrench, spare yourself the drama. Tighten the jaws of the wrench onto the bolt, then see which drill bit matches the wrench’s opening. You’ll never have to drill three times for one bolt ever again.
Hence then, the article about 10 ways to use your hand tools and power tools together to do more was published today ( ) and is available on Live Hacker ( Middle East ) The editorial team at PressBee has edited and verified it, and it may have been modified, fully republished, or quoted. You can read and follow the updates of this news or article from its original source.
Read More Details
Finally We wish PressBee provided you with enough information of ( 10 Ways to Use Your Hand Tools and Power Tools Together to Do More )
Also on site :