Why Your Old SD Card Won't Work With the Switch 2 ...Middle East

News by : (Live Hacker) -

The Switch 2 comes with 256GB of internal storage, a generous amount compared to its predecessor, which started at only 32GB. However, if you want more storage so you can load some bigger games, you might've noticed the Switch 2 won't accept your old SD cards. The new console only uses SD Express cards.

Unfortunately, this also means you'll need a new SD Express card for the Switch 2. If you're not familiar with this particular type of card or why it matters, let's break it down.

SD Express cards—marked by an EX on the card—on the other hand, use PCIe and NVMe interfaces similar to the kind that you see on solid state hard drives. That means they can theoretically reach speeds up to 985MB/s, and in practice, they get pretty darn close. The Lexar Play PRO card, for example, reads at up to 900MB/s speeds, and can write at 600MB/s. That extra speed can come at a higher cost, with 256GB microSD Express cards starting around $60.

Once the game is downloaded, though, load times are the real winner. If you regularly sit through every loading screen tip twice, you know that waiting for your game to load data after a fast travel or entering a new map is a huge annoyance. For games saved to your SD card, faster speeds means less time waiting.

Why does the Switch 2 need SD Express cards?

Even on comparable handheld platforms like the Steam Deck, the standard for expanding storage has been to use internal SSD expansions, which often require complex DIY upgrades. Doable for the average tech-savvy Lifehacker reader, sure, but perhaps a too-high demand for the general population.

SD Express cards are, at least for now, probably the best compromise between the increasingly insufficient speeds of traditional microSD cards, and committing to complex SSD storage options. And even SD Express cards could feel too slow in a few years: In speed comparisons, they're already a bit slower than the Switch 2's internal storage (though, surprisingly, faster than official cartridges).

Which SD Express cards should you get?

256GB Lexar Play PRO microSD Express card $59.99 at Amazon Shop Now Shop Now $59.99 at Amazon 256GB SanDisk microSD Express card $67.99 at Amazon Shop Now Shop Now $67.99 at Amazon Nintendo-branded 256GB Samsung microSD Express card $59.00 at Amazon Shop Now Shop Now $59.00 at Amazon SEE 0 MORE

The 256GB Lexar Play PRO microSD Express card starts at $60 and is one of the most affordable options around. It cites a 900MB/s read and 600MB/s write speed, which is among the fastest I've seen so far. Lexar also offers 512GB and 1TB variants, though they're more expensive and sometimes out of stock.

The Nintendo-branded Samsung microSD Express card comes with Nintendo's official seal of approval, but no listed speeds. It's still likely to be faster than typical SD cards, but without specs, we can't say how much faster. If Nintendo's official seal of approval is reassuring, though, this one also starts at $60.

Over time, there are likely to be more options, and prices for SD Express cards will (hopefully) fall. For now, it's more expensive to add storage to your new Switch 2 than it was for the old model. But at least that storage will be much faster. And with 256GB already built-in, you might not even need it.

Hence then, the article about why your old sd card won t work with the switch 2 was published today ( ) and is available on Live Hacker ( Middle East ) The editorial team at PressBee has edited and verified it, and it may have been modified, fully republished, or quoted. You can read and follow the updates of this news or article from its original source.

Read More Details
Finally We wish PressBee provided you with enough information of ( Why Your Old SD Card Won't Work With the Switch 2 )

Last updated :

Also on site :

Most Viewed News
جديد الاخبار