3 min read
Preparations for Next Moonwalk Simulations Underway (and Underwater) GRX-810 is a new metal alloy developed by NASA for 3D printing parts that can withstand the extreme temperatures of rocket engines, allowing affordable printing of high-heat parts.NASAUntil now, additive manufacturing, commonly known as 3D printing, of engine components was limited by the lack of affordable metal alloys that could withstand the extreme temperatures of spaceflight. Expensive metal alloys were the only option for 3D printing engine parts until NASA’s Glenn Research Center in Cleveland, Ohio, developed the GRX-810 alloy.
The primary metals in the GRX-810 alloy include nickel, cobalt, and chromium. A ceramic oxide coating on the powdered metal particles increases its heat resistance and improves performance. Known as oxide dispersion strengthened (ODS) alloys, these powders were challenging to manufacture at a reasonable cost when the project started.
However, the advanced dispersion coating technique developed at Glenn employs resonant acoustic mixing. Rapid vibration is applied to a container filled with the metal powder and nano-oxide particles. The vibration evenly coats each metal particle with the oxide, making them inseparable. Even if a manufactured part is ground down to powder and reused, the next component will have the qualities of ODS.
The benefits over common alloys are significant – GRX-10 could last up to a year at 2,000°F under stress loads that would crack any other affordable alloy within hours. Additionally, 3D printing parts using GRX-810 enables more complex shapes compared to metal parts manufactured with traditional methods.
Elementum 3D, an Erie, Colorado-based company, produces GRX-810 for customers in quantities ranging from small batches to over a ton. The company has a co-exclusive license for the NASA-patented alloy and manufacturing process and continues to work with the agency under a Space Act Agreement to improve the material.
“A material under stress or a heavy load at high temperature can start to deform and stretch almost like taffy,” said Jeremy Iten, chief technical officer with Elementum 3D. “Initial tests done on the large-scale production of our GRX-810 alloy showed a lifespan that’s twice as long as the small-batch material initially produced, and those were already fantastic.”
Commercial space and other industries, including aviation, are testing GRX-810 for additional applications. For example, one Elementum 3D customer, Vectoflow, is testing a GRX-810 flow sensor. Flow sensors monitor the speed of gases flowing through a turbine, helping engineers optimize engine performance. However, these sensors can burn out in minutes due to extreme temperatures. Using GRX-810 flow sensors could improve airplane fuel efficiency, reduce emissions and hardware replacements.
Working hand-in-hand with industry, NASA is driving technology developments that are mutually beneficial to the agency and America’s space economy. Learn more: spinoff.nasa.gov/
Read MoreShare
Details
Last Updated Aug 15, 2025Related Terms
Technology Transfer & SpinoffsGlenn Research CenterSpinoffsTechnology TransferExplore More
2 min readNASA Seeks Industry Feedback on Fission Surface Power
Article 22 hours ago 2 min readNASA Glenn Earns Commercial Invention of the Year Award
Article 1 day ago 2 min readNASA Glenn Shoots for the Stars During WNBA All-Star Weekend
Article 2 days ago Keep ExploringDiscover Related Topics
Missions
Humans in Space
Glenn Research Center
3D-Printed Habitat Challenge
Hence then, the article about nasa developed printable metal can take the heat was published today ( ) and is available on NASA ( Middle East ) The editorial team at PressBee has edited and verified it, and it may have been modified, fully republished, or quoted. You can read and follow the updates of this news or article from its original source.
Read More Details
Finally We wish PressBee provided you with enough information of ( NASA-Developed Printable Metal Can Take the Heat )
Also on site :
- One person in critical condition following two-vehicle collision on SR-126 at Boosey Road
- Supermarket timings for Boxing Day and New Year revealed for Asda, Tesco, Sainsbury’s, Aldi, Lidl and more
- Trump rants about Epstein in Christmas Day post claiming he dropped ties with sex offender ‘long before it became fashionable’