If you've purchased a Buzz Drone e-bike and decided to tweak the settings, you've probably been met with a confusing surprise: the settings menu is all but incomprehensible. I've put together this explainer to get you up to speed on how to change the settings on a Buzz Drone e-bike.
(Check out my full review of the Buzz Drone here.)
How to access the settings on Buzz Drone e-bike
Credit: Stephen JohnsonOnce you're in the settings menu, you can change settings with the "+ " and "-" keys, and navigate from screen to screen by pressing the "i" button, which will also save the setting you entered. Here's what each screen means:
Credit: Stephen Johnsonbl: The second setting screen should read "bl-1". Bl stands for "backlight" or how bright your screen is. Use the "+" and "-" buttons to set it from 1 to 3. Press "i" to save the setting and move to the next screen.
At any point, you can long-press "i" (more than two seconds) to store all your settings and exit the settings menu to the main display.
Credit: Stephen JohnsonWhat do the error codes mean on a Buzz Drone e-bike?
If you receive any of these numerical error codes on your Buzz Drone, here's the problem:
22 & 02: Throttle/Throttle cable connection
24 & 04: Low voltage (this could indicate you need to charge your battery)
26 & 06: Sensor issue
30: Communication Fault
If there is a problem you can't fix or diagnose with your Buzz Drone, it might be covered under the bike's warranty. The electrical components are covered by warranty for two years, the components (fork, stem, handlebar, headset, seat post, etc.) for six months, and the frame for 10 years. You can contact Buzz's customer service through the form at the bottom of this page, or call (877) 799-2899.
Read More Details
Finally We wish PressBee provided you with enough information of ( How to Change the Settings on a Buzz Drone E-bike )
Also on site :